LDMOS HF amplifier 1W(or 0.5W or 60-80) input 1200W output BLF578 1.8-54 MHz
This a ready power amplifier. You will need a case and power supply only!
The attenuator is not included in the kit. It is necessary to establish independently. The choice of the attenuator value depends on the output power of the transmitter.
Attention! It is necessary to use a transmitter with a full output power. ALC emissions can damage the transistor.
Water-cooled hermetically. You can turn the power amplifier. The water will not flow.
The power supply may be for example: FlatPack2 HE
Transistor BLF578 1 pcs.
Transistor are installed on a copper radiator with liquid metal "CoolLaboratory Liquid PRO"
You can buy a housing like this: http://www.ebay.com/itm/121995534231?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Input power - 1W (0.5W other option)
Option 2 - 60-80W input power with ATT
Output power 1200W (SSB/CW)
This tube is sufficient for cooling, because The internal area of the tube is L=PD
Two levels of blowing. Running the second level at a copper radiator temperature is more than 50 degrees Celsius. Stop transmission for copper radiator temperature is more than 80 degrees Celsius.
Supply voltage 53V
Voltage 12V 0.5A
Protection in power output
Protection against spontaneous or incorrect switching LPF.
LCD - out power and VSWR
LED indication of protection operation by SWR, current and maximum output power.
Installed on the cable output SO-239
TRX cable SO-239
Control 25 pin connector
Size 240 mm x 260 mm x 140(h) mm
Weight 4.6 kg
You can buy all the parts separately:
Attention! The amplifier can not be used with SunSDR!